简介: |
报告摘要: Dislocations are 1D topological defects
that exert control over composition, strain, and charge at extended
length scales. They offer an additional means to tailor thermal and
electrical conductivity beyond the limitations imposed by traditional
bulk doping. In contrast to atomistic doping, the dislocation
structure is stable to several hundred degree Celsius. In the case of
ferroelectrics, dislocations act as nucleation sites for domain
formation and serve as pinning centers for the motion of domain walls,
which are 2D topological defects. However, the potential of extended
dislocations in bulk ferroelectrics has been widely underestimated.
Furthermore, uniaxial plastic deformation can induce irreversible and
elastic strain fields in ferroelectrics, allowing for the permanent
tailoring of elastic energy. This means that dislocations possess the
capability to impart strain modifications to bulk ferroelectrics. In this talk, my focus will be on a
novel approach to manipulate the mobility of ferroelectric domain
walls and piezoelectricity of single-crystal BaTiO3. Specifically, we
achieved a 19-fold increase in the converse piezoelectric coefficient
by imprinting dislocations via high-temperature creep along the [001]
direction. By employing controlled high-temperature plastic
deformation along the [110] direction, we successfully optimized the
dielectric and electromechanical properties of the material. This
optimization was achieved by leveraging the anisotropic interactions
between 1D dislocations and 2D domain walls. Time permitting, we will
discuss the domain instability and extrinsic degradation processes
that can both be mitigated during the aging and fatigue with a careful
strain tuning of the ratio of in-plane and out-of-plane domain
variants. Intrinsic strain engineering in bulk ferroelectrics
highlights the potential of plastic deformation as a means to tailor
the microstructure and functionality of ferroelectrics. Texture will
be quantified using nuclear paramagnetic resonance (Dr. Pedro
Grosczewicz) and temperature dependent domain evolution will be
revealed using in-situ transmission electron microscopy (group of
Xiaoli Tan). If accessible, I may report on options to introduce
dislocations into polycrystalline oxides in general and ferroelectrics specifically.
报告人简介:
卓芳平博士,2018年获清华大学理学博士学位,2017年在瑞士洛桑联邦理工学院Dragan Damjanovic教授课题组访学,2019年至2020年在韩国科学技术研究所(KAIST)物理系 Chan-Ho Yang教授课题组担任博士后研究员,2020年至今在德国达姆斯塔特工业大学材料和地球科学系Jürgen R?del教授课题组从事研究工作。主要研究兴趣包括铁性材料的缺陷工程和基于机器学习的压电力显微镜技术。主持德国洪堡博士后基金、达姆施塔特工业大学种子基金和德国自然科学基金(Deutsche Forschungsgemeinschaft,DFG)各一项。 |