演讲者简历

    Bart van Esch博士是荷兰埃因霍芬理工大学机械工程系assistant professor，1990年在荷兰莱顿大学获天文学硕士学位，1992年在荷兰特文特大学获计算力学技术设计硕士学位，1997年在荷兰特文特大学获机械工程博士学位。

研究方向

·        旋转机械和计算流体力学

学术兼职业绩：

·        国际水力学会水力机械及系统学术委员会委员

·        2004以来，模型流体流动国际会议学术委员会委员和分会主席

·        第5和第6届国际泵机械学术讨论会session chairman

·        2000以来: 荷兰Bosman 水处理公司兼职水动力工程师

近期期刊论文

2009

B.P.M. van Esch, Performance and Radial Loading of a Mixed-flow Pump Under Non-uniform Suction Flow, J. Fluids Eng., 131(5), 1-7, (2009)

2008

G.P. Willems, B.P.M. van Esch, J.J.H. Brouwers, M. Golombok, Creeping film model for condensed centrifugal separation processes, Chem. Eng. Sci., 63(13), 3358-3365, (2008)

B.P.M. van Esch, J.G.M. Kuerten, Direct numerical simulation of the motion of particles in rotating pipe flow, J. Turbulence, 9(4), 1-17, (2008)

2007

N.W.H. Bulten, B.P.M. van Esch, Fully transient CFD analyses of waterjet pumps, Marine Technology, , 44(3), 185-193, (2007)

J.G.M. Kuerten, B.P.M. van Esch, H.P. van Kemenade, J.J.H. Brouwers, The effect of turbulence on the efficiency of the rotational phase separator, Int. J. Heat Fluid Flow, 28, 630-637, (2007)

2006

N.W.H. Bulten, R. verbeek, B.P.M. van Esch, CFD Simulations of the Flow Through a Waterjet Installation, Int. J. of Maritime Eng., , 148, 23-33, (2006)

2001

J.D.H. Kelder, R.J.H. Dijkers, B.P.M. van Esch, N.P. Kruyt, Experimental and theoretical study of the flow in the volute of a low specific-speed pump , Fluid Dynamics Research, 28, 267-280, (2001)

B.P.M. van Esch, N.P. Kruyt, Hydraulic performance of a mixed-flow pump: unsteady inviscid computations and loss models , J. Fluids Eng., 123, 256-264, (2001)

1999

N.P. Kruyt, B.P.M. van Esch, J.B. Jonker, A superelement-based method for computing unsteady three-dimensional potential flows in hydraulic turbomachines, Comm. Num. Meth. Eng., 15(6), 381-397, (1999)

B.P.M. van Esch, Hydrodynamics of Pumps by C.E. Brennen (book review), J. Fluid Mech., 400, 376-378, (1999)

近期会议论文

2009

D. de Kleine, B.P.M. van Esch, J.G.M. Kuerten, A.W. Vreman, Calculation of Unsteady Flow in a Centrifugal Pump With Vaned Diffuser Using Staggered and Collocated Grid Methods ,
in Proceedings of the ASME 2009 Fluids Engineering Division Summer Meeting; Vail, Colorado, United States, FEDSM2009-78113, (2009)

B.P.M. van Esch, L. Cheng, Blade Interaction Forces in a Mixed-Flow Pump With Vaned Diffuser,
in Proceedings of the ASME 2009 Fluids 2009 ASME Fluids Engineering Division Summer Meeting; Vail, Colorado, United States, FEDSM2009-78114, (2009)

2008

D. de Kleine, B.P.M. van Esch, J.G.M. Kuerten, A.W. Vreman, , Simulation of the unsteady, incompressible flow in a centrifugal pump with vaned diffusor using staggered and collocated grid methods in 2D,
in WSEAS Fluid Mechanics and Aerodynamics; Rhodos, Greece, .., (2008)

2007

J.G.M. Kuerten, B.P.M. van Esch, The turbulent rotational phase separator,
in Particle-laden flow; Editors: B.J. Geurts, H. Clercx, W. Uijttewaal, Enschede, Netherlands, 393-405, (2007)

J.G.M. Kuerten, C.W.M. van der Geld, B.P.M. van Esch, Heat transfer during growth of a boiling bubble on the wall in turbulent channel flow,
in 11th EUROMECH European Turbulence Conference; Editors: J.M.L.M. Palma and A.Silva Lopes, Porto, Portugal, 277-279, (2007)

2006

B.P.M. van Esch, N.W.H. Bulten, Hydrodynamic forces on the impeller of a waterjet propulsion system, in Conference on Modelling Fluid Flow, ISBN 9630603829; Editors: T. Janos, J. Vad, Budapest, Hungary, 1103-1109, (2006)

N.W.H. Bulten, B.P.M. van Esch, Fully transient CFD analyses of waterjet pumps ,
in Proceedings of the SNAME 11th Propellers and Shafting Symposium; Williamsburg, United States, -, (2006)

J.G.M. Kuerten, B.P.M. van Esch, H.P. van Kemenade, J.J.H. Brouwers, The effect of turbulence on the efficiency of the rotational phase separator,
in Conference on Modelling Fluid Flow, ISBN 9630603829; Editors: T. Janos, J. Vad, Budapest, Hungary, 722-729, (2006)

N.W.H. Bulten, R. verbeek, B.P.M. van Esch, CFD simulations of the flow through a waterjet installation,
in Proceedings of RINA conference on high performance marine vessels; Shanghai, China, -, (2006)

2005

B.P.M. van Esch, N.W.H. Bulten, Numerical and experimental investigation of hydrodynamic forces due to non-uniform suction flow to a mixed-flow pump,
in proceedings of the 2005 ASME Fluids Engineering Division Summer Conference; Houston, Texas, United States, FEDSM2005-77208, (2005)

N.W.H. Bulten, B.P.M. van Esch, Review of thrust prediction method based on momentum balance for ducted propellers and waterjets,
in proceedings of the 2005 ASME Fluids Engineering Summer Conference; Houston, Texas, United States, FEDSM2005-77209, (2005)

2003

P.J. Nyirenda, B.P.M. van Esch, Experimental investigation of hydrodynamic forces due to non-uniform entrance flow to a mixed-flow pump,
in Conference on modelling fluid flow; Budapest, Hungary, 984-990, (2003)

N.W.H. Bulten, B.P.M. van Esch, Determination of radial forces in a mixed-flow waterjet pump due to non-uniform entrance flow with CFD-calculations,
in Conference on modelling fluid flow; Budapest, Hungary, 977-983, (2003)

1997

B.P.M. van Esch, N.P. Kruyt, J.B. Jonker, An inviscid-viscous coupling method for computing flows in entire pump configurations,
in third international symposium on pumping machinery, ASME FED Summer Meeting; Editors: Dr. T.B. Morrow, Vancouver, Canada, FEDSM97-3373, (1997)

1995

B.P.M. van Esch, N.P. Kruyt, J.B. Jonker, An efficient method for computing three-dimensional potential flows in hydraulic turbomachines,
in Finite Elements in Fluids - New Trends and Applications; Venice, Italy, 200-208, (1995)

N.P. Kruyt, B.P.M. van Esch, J.B. Jonker, Analysis of three-dimensional potential flows in centrifugal and mixed-flow pumps by a finite element method,
in 10th Conference on Fluid Machinery; Budapest, Hungary, 100-108, (1995)

B.P.M. van Esch, N.P. Kruyt, Analysis of the flow in a centrifugal pump using a multi-block finite element method for computing three-dimensional potential flows,
in ERCOFTAC Seminar and Workshop i on 3D Turbomachinery Flow Prediction III; Val d'Isere, France, 360-368, (1995)